Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
66
2. To access the Supervisor menu, press 6 (this option is not voiced). The system voices
the Supervisor menu options:
3. From the Supervisors menu, press 9 to modify system parameters. The system prompts
you to enter the Technician password. By default, this password is 1234 on Small
Office Lite systems or, on Debut units, the last four digits of the bar code on the white
sticker on the bottom of the unit.
4. At the prompt, enter the number of the parameter you want to change, then, as prompted,
the value to which you want to change the parameter. Parameter information is provided
in a comprehensive table shown in section 2.7.2.
When you complete all modifications, press # to return to the Supervisor’s menu.
Note: Refer to section 2.7.2 for information on values you can specify for certain
parameters and for information on adjusting parameters in the VM.CFG file.
For detailed information on each field of System Information screens, refer to
the Installation and Maintenance Manual.
Supervisor Menu
For Mailbox Administration Press 1
For Routing Box Administration Press 2
For Question Box Administration Press 3
For Port Administration Press 4
To Change the System Broadcast Message Press 5
To Change the voice mail Day / Night Service Press 6
To Change the System Time Press 7
To Change the System Date Press 8
To Modify System Parameters Press 9
To Perform First-Time Setup Press 0
To Exit Press #