Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
69
2.7.2 Teleparameter Value Tables
The following table identifies all parameters you can adjust using the teleparameter feature
and the entries you can make to indicate specific values for each parameter. Refer to
information after this table for additional entries you can make in some fields.
Task Param.
Number
Description Acceptable Values Notes:
Account
Number Box
Setup
2700 Minimum number of digits
required for valid entry
determination
1 - 9 A prompt for the
Item number refers
to the box number.
Enter the box
number.
Account
Number Box
Setup
2701
Maximum number of digits
required for valid entry
determination
1 - 30
A prompt for the
Item number refers
to the box number.
Enter the box
number.
Account
Number Box
Setup
2702
Number of seconds to wait
before determining all digits
are entered
0 - 9
A prompt for the
Item number refers
to the box number.
Enter the box
number.
Account
Number Box
Setup
2703
Action to take after
maximum retry attempts if
invalid account number is
entered
0 = Return
1 = Say ‘Goodbye’
2 = Go to another box
3 = Hang up
A prompt for the
Item number refers
to the box number.
Enter the box
number.
Account
Number Box
Setup
2704 Box associated with
parameter 2703
(Valid mailbox
number)
A prompt for the
Item number refers
to the box number.
Enter the box
number.
Account
Number Box
Setup
2705 Retry attempts to allow if
invalid account number
entered
0 - 9 A prompt for the
Item number refers
to the box number.
Enter the box
number.
Account
Number Box
Setup
2706 Number of mailbox that
owns the Account Number
box
(Valid mailbox
number)
A prompt for the
Item number refers
to the box number.
Enter the box
number.