Data Sheet for Product

9
Siemens CE1N4510en
Smart Infrastructure 2020-11-26
Communication SAV61P../MO
Communication protocol
Modbus RTU RS-485, not galvanically isolated
Number of nodes Max. 32
Address range 1...248 / 255
Factory setting 255
Transmission formats 1-8-E-1 / 1-8-O-1 / 1-8-N-1 / 1-8-N-2
Factory setting 1-8-E-1
Baud rates (kbaud) Auto / 9.6 / 19.2 / 38.4 / 57.6 / 76.8 / 115.2
Factory setting Auto
Bus termination 120 Ω electronically switchable
Factory setting Off
Parallel connection
SAV61P00 ≤ 10 (depending on controller output)
Forced control
Z positioning signal
SAV61P00 R = 0...1000 Ω, G, G0
R = 0...1000 Ω Stroke proportional to R
Z connected to G Max. stroke 100 %
2)
Z connected to G0 Max. stroke 0 %
2)
Voltage
Max. AC 24 V ± 20 %
Max. DC 24 V +20% / -15%
Power consumption ≤ 0.1 mA
Position feedback
Position feedback U
SAV61P00 DC 0...10 V
Load impedance > 10 kΩ resistive
Load Max. 1 mA
Connection cables
Wire cross-sectional areas 0.75 mm
2
, AWG 20...16
3)
Cable entries
SAV..P.. ● 2 entries
∅
20.5 mm (for M20)
● 1 entry
∅
25.5 mm (for M25)
SAVP61../MO
Fixed connection cable 0.9 m
Number of cores 5 x 0.75 mm
2
Degree of protection and class
Housing from vertical to horizontal IP 54 as per EN 60529
4)
Protection class As per EN 60730
SAV31P00 AC 230 V II
SAV61P00
AC / DC 24 V III
SAV81P00