Operating instructions

Configuration / diagnostics using remote mechanisms
5.1 Assignment of an IP address
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Operating instructions, 09/2006, A5E00349864 Release 7
5-7
Starting Web Based Management
INC devices (Industrial Network Component) such as the SCALANCE X-200 have a Web
Based Management. Select the device you want to configure with Web Based Management
and perform one of the following steps to start Web Based Management:
• Select the Module > INC Browser menu command.
• Click on the third button from the left in the toolbar (module with four blue cords).
Figure 5-4 Dialog for starting Web Based Management
If the Module > Start INC Browser and the module icon are deactivated, there is no Web
Based Management for the selected module.
Removing a module
You can remove a module from the list in the left part of the program window by selecting the
Module > Remove Module menu command. Using this menu has no effect on the existence
of a module in the network, after browsing the network again, all modules would be
displayed again.
Assigning a PN IO device name
You can assign a PN IO device name to PROFINET IO-compliant devices. After selecting
the Module > Assign Name menu, a dialog box opens in which you can enter the required
name. The name can be a maximum of 255 characters long and over and above letters and
numbers can contain only the special characters slash, hyphen, and underscore.
Finding the location of a device
With the Module > Ring command, you can make the LEDs of the relevant device flash. After
selecting this menu, a dialog appears with which you can start and finish signaling.
The activity of the LEDs indicates which device is assigned to a particular list entry in the
program window.