Operating instructions

Configuration / diagnostics using remote mechanisms
5.2 Configuration with Web Based Management (WBM)
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Operating instructions, 09/2006, A5E00349864 Release 7
5-11
5.2.4 LED simulation
Display of the operating state
The devices of the X-200 product line have several LEDs that provide information on the
operating state of the devices. Depending on the their location, direct access to the devices
is not always possible. WBM therefore provides a simulated display of the LEDs.
In the dialog (see below), you can see a schematic representation of the SCALANCE X-200
with the existing modules and the corresponding LEDs. The send display is not displayed
realistically; in other words, the LEDs do not flash.
Figure 5-6 "LED Simulation" Display
5.2.5 Working with WBM
Note
On devices with software version V1.x, TELNET and CLI access is not enabled for the user.
Navigation bar
The upper menu bar of WBM provides 3 links:
• Console
This link opens a console window. In this window, you can enter CLI commands. You are
then connected to the switch over a TELNET connection.
• Support
This link initiates an Internet connection that takes you directly to the support pages of
SIEMENS AG. This is only possible when the PC supports an Internet connection.
• Log out
Closes the browser window.