Operating instructions

Configuration / diagnostics using remote mechanisms
5.2 Configuration with Web Based Management (WBM)
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Operating instructions, 09/2006, A5E00349864 Release 7
5-15
Enter the name of a contact person responsible for managing the device in this box.
System Location text box
In this box, you enter a location for the device, for example a room number.
System Name text box
Enter a description of the device in this box.
You apply your settings with Set Values.
5.2.6.3 The "System Restart & Defaults" WBM menu
System Restart & Defaults
In this screen, there is a button with which you can restart the device and various options for
resetting to the device defaults.
Figure 5-9 "Restart and Defaults" dialog
Restart System button
Click this button to restart the SCALANCE X-200. You must confirm the restart in a dialog
box. During a restart, the SCALANCE X-200 is reinitialized, the internal firmware is reloaded.
The learned entries in the address table are deleted. You can leave the browser window
open while the SCALANCE X-200 restarts.
Reset and Restart button