Operating instructions

Configuration / diagnostics using remote mechanisms
5.2 Configuration with Web Based Management (WBM)
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
5-18 Operating instructions, 09/2006, A5E00349864 Release 7
5.2.6.5 The "System Save & Load TFTP" WBM menu
System Save & Load TFTP
The WBM allows you to store configuration information in an external file on a TFTP server
or to load such data from an external file from the TFTP server to the SCALANCE X-200.
You can also load new firmware from a file located on the TFTP server. You can make the
entries required for this on the page of the System Save & Load TFTP menu.
Figure 5-11 "System Save and Load via TFTP" dialog
TFTP Server IP Address text box
The IP address of the TFTP server with which you want to exchange data.
TFTP Server IP Port text box
The port of the TFTP server over which data exchange will be handled. If necessary, you
can change the default value 69 to your own requirements.
Configuration File text box
Name and possibly also folder path of the configuration file (maximum 32 characters) that
you want to load on the SCALANCE X-200 or where you want to store the current
configuration information.
Event Log File text box (relevant for IRT switches only)
By clicking "Save", you can save the event table (event log file) to your PC.
Firmware File text box