Operating instructions

Configuration / diagnostics using remote mechanisms
5.2 Configuration with Web Based Management (WBM)
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Operating instructions, 09/2006, A5E00349864 Release 7
5-25
Link Down Enabled check box
Here, you can activate/deactivate monitoring of the link status for the individual ports.
Note
With the default setting as supplied, no port is monitored; in other words, the fault mask is
empty.
5.2.6.11 The "Ring Redundancy" WBM menu
Ring redundancy
This page allows you to set the ring ports used to integrate the device in a ring topology.
Figure 5-17 "Ring Redundancy" dialog
Enable Ringports text box
Enables/disables ring redundancy.
Ring Ports text box