Operating instructions

Configuration / diagnostics using remote mechanisms
5.2 Configuration with Web Based Management (WBM)
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Operating instructions, 09/2006, A5E00349864 Release 7
5-35
Enables/disables SNMP functionality.
E-Mail check box
Enables/disables E-mail functionality.
DHCP check box
Enables/disables the SCALANCE X-200 searching for a DHCP server in the network when it
starts up and configuring its IP parameters according to the data supplied by this server.
Traps check box
Enables/disables trap functionality.
TELNET check box
Enables/disables the availability of the SCALANCE X-200 over TELNET.
IP Address text box
The IP address of the SCALANCE X-200. If you make a change here, the WBM loses the
connection to the SCALANCE X-200. Enter the new address in the Internet browser to
reestablish the connection.
Subnet Mask text box
Here, you enter the subnet mask of the SCALANCE X-200.
Default Gateway text box
If the PC with the Internet browser is not in the same subnet as the SCALANCE X-200, you
must enter the IP address of the default gateway here.
5.2.6.16 The "Agent Event Configuration" WBM menu
Agent Event Configuration
On this page, you specify how the SCALANCE X-200 reacts to system events. By selecting
the corresponding check boxes, you specify how the SCALANCE X-200 reacts to the various
events. The following options are available:
• The SCALANCE X-200 sends an E-mail.
• The SCALANCE X-200 triggers an SNMP trap.
• The SCALANCE X-200IRT saves the relevant event in the event table (relevant for IRT
switches only).