Operating instructions

Configuration / diagnostics using remote mechanisms
5.2 Configuration with Web Based Management (WBM)
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
5-42 Operating instructions, 09/2006, A5E00349864 Release 7
• SIMATIC time
If you use the SIMATIC time transmitter, you do not need to make any further settings.
• Manual
Here, an input field opens for you to enter the current time. The time is quartz controlled
and thus always exact. When you switch off or reset the device, this information is lost
and must be entered again.
Time Zone Offset list box
You can enter a time zone correction for the SNTP protocols here.
5.2.6.21 The "Switch Configuration (Port Mirroring)" WBM menu
Port Mirroring
With this dialog, you can enable or disable port mirroring; in other words, mirroring the data
traffic from the mirror port to the monitor port.
Apart from the device be monitored, no other communication node should be connected to
the monitor port.
Figure 5-28 "Switch Configuration (Port Mirroring)" dialog