Operating instructions

PROFINET IO functionality
7.2 Settings in HW Config
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Operating instructions, 09/2006, A5E00349864 Release 7
7-9
Port-specific settings
Here, you can make the settings for the individual ports.
Alarm generation
Figure 7-8 "Properties - RJ-45 Port, Alarm Generation Parameter" dialog
Setting adopted from configuration
The alarm setting is set explicitly for each port
Setting as when data transfer starts
The status of the link of the relevant port when the device changes to data exchange with the
PNIO controller is stored.