Operating instructions

Product properties
3.20 Displays
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
3-64 Operating instructions, 09/2006, A5E00349864 Release 7
3.20.3 Port status indicator (green/yellow LEDs)
Port status indicator (green/yellow LEDs)
The LEDs signal that the device can adopt the following statuses.
The status of the interfaces is indicated by two-color LEDs:
Device type SCALANCE
Number of port
LEDs
LED lit green LED lit yellow LED flashes
yellow
LED flashes
green
X108 8 port LEDs 1 2 4 -
X104-2 6 port LEDs 1 2 4 -
X106-1 7 port LEDs 1 2 4 -
X208 8 port LEDs 1 2, 3 4 5, 6
X208PRO 8 port LEDs 1 2, 3 4 5
X204-2 6 port LEDs 1 2, 3 4 5, 6
X206-1 7 port LEDs 1 2, 3 4 5, 6
X204-2 LD 6 port LEDs 1 2, 3 4 5, 6
X206-1 LD 7 port LEDs 1 2, 3 4 5, 6
X202-2IRT 4 port LEDs 1 2, 3 4 5, 6
X204IRT 4 port LEDs 1 2, 3 4 5, 6
X202-2P IRT 4 port LEDs 1 2, 3 4 5, 6
X201-3P IRT 4 port LEDs 1 2, 3 4 5, 6
X200-4P IRT 4 port LEDs 1 2, 3 4 5, 6
1. TP link exists, no data reception.
2. TP link, data received at TP port.
3. Device startup, the LED is lit for approx. 6 seconds.
4. Setting or display of the fault mask.
5. The "Show Location" function was enabled over Ethernet (for example, PST tool).
The button was pressed for longer than 15 seconds to reset the configuration.
6. PROFINET IO operation was started with the PN IO controller, the attempt to change the
fault mask with the button was rejected by all the port LEDs flashing once.