Operating instructions

LCD-MonitorSCD1297 
Page6/19



DOC-No.:B30071D1.DOC



1.2 WarningsandSafetyNotes

Transport
TheLCD-monitorshouldonlybetransportedinitsoriginalpackagingtoensureitwillbeprotected
againstshocksandroughhandling.


Settingup
Wheninstallingthemonitor,itshouldbenotedwhetheranymoisture(condensation)hasenteredthe
unit during transport or storage. Additional important installation information can be found in the
“TechnicalData”chapter.


EMC
This is a Class A piece of equipment (industrial use). In domestic situations, it may cause
interference. Under such circumstances, the operator can be required to undertake appropriate
measurestominimiseproblems
.
ThisLCD-monitorisacomponentdesignedforbuildingintoindustrialsystems.Theoperatorofthe
entireplantisresponsibleformaintainingelectromagneticcompatibilityaccordingtoEMC-law.

Repairs
Before theunit is opened,the supply voltage must be switchedoff. Onlyauthorisedpersonsmay
opentheunit.

AdditionsorchangestotheunitmaydamagethesystemoraffectitsEMCbehaviour.


Cleaning
Theunitmustbeisolatedfromthepowersupplybeforecleaning.Ifheavilysoiled,theLCD-monitor
canbecleanedwithadampclothandmilddetergent.Caremustbetakentoensurethatnomoisture
enterstheunitduringcleaning.

Scouringpowdersandsolventsmustneverbeallowedtocomeincontactwiththeunit.Theinsideof
theunitistobecleanedbyqualifiedservicetechniciansonly.