Data Sheet for Product

‘SEH’ Series Notification Appliances 2589C
s Canada Limited
Building Technologies Division
s
Data Sheet
Fire Safety Products
Notification Appliances
SEH – High-Fidelity Speakers and Speaker Strobes
Application: Indoor
Product Overview
– Siemens Series ‘SEH’ of High-Fidelity (HiFi) speakers / speaker-strobes are comprised of high-efficient
design for maximum output (at minimum wattage) across a sizeable frequency range, 300 to 8000 Hz
– Current Siemens Series ’SE’ of speakers / speaker-strobes can easily be upgraded into the Siemens Series ‘SEH’
– Siemens Series ‘SEH’ appliances have a plastic finish in which each model has a built-in level-adjustment feature
▪ Snap-on grille cover with non-visible mounting screws for a level finish
– Series ‘SEH’ appliances mounts to a 10.2 cm. [4-inch] square by 5.4 cm. [2-1/8”]-deep back box:
▪ Compatible with the SPEXT extension ring, which prevents wire damage
▪ Model SPEXT is an optional extender used for mounting to 10.2 cm. [4-inch] back boxes without an extension ring
– The strobes portion of the Series ‘SEH’ appliances can be synchronized when used with any of the following:
▪ 252 / 504-point addressable fire-safety systems
▪ Siemens Modular and FireFinder® XLS control panels
▪ Siemens Dual-Sync Control Modules -> Model DSC-series with built-in sync protocol
▪ Siemens PAD-series of NAC Extenders
– Siemens Series ‘SEH’ meets the requirement for low-frequency signal tone when used with:
▪ One (1) Amplifier Card {Model VCI2001-U1} with Siemens 252-point / 504-point addressable FACPs
▪ One (1) Booster Amplifier {Model EBA200x Series} with Siemens 252-point / 504-point addressable FACPs
▪ One (1) 40W Zone Amplifier Card {Model ZAC-40} with Siemens Modular and FireFinder XLSV
– Fast installation with In / Out screw terminals using
#
12 to
#
18 AWG wires
– Field-selectable taps for 25 or 70 VRMS operation from 1/8 Watt up to 2 Watts
– HiFi speaker-strobes produce one (1) flash per second
– Ceiling-mount HiFi signaling devices are available with six (6) field-selectable settings:
▪ 15/30/75/95cd for single-Candela strobes
▪ 15/30/75/95cd or 115/177cd multi-Candela strobes
– Wall-mount HiFi signaling devices are available with six (6) field-selectable settings:
▪ 15/30/75/110cd or 135/185cd for multi-Candela strobes
– Wall-mount, standalone speaker available
▪ Red and white
– UL 1480 and 1971 Listed, ULC-S526, -S541 Listed;
CSFM (
#
7320-0067:0275) Approved
– ADA, NFPA and ANSI Compliant;
Complies with OSHA 29 Part 1910.165
SEH-HMC-W
Speaker Strobe
SECH-R
Speaker
SEH-HMC-CW
Speaker Strobe
SEH-R
Speaker