Operating Instructions
Descriptions of Parameter Settings
Descriptions of Parameter Settings
151 | 443
Pr.
Explanation
Settings
Default
04-10
11
th
step speed frequency
0.00–599.00 Hz
0.00
04-11
12
th
step speed frequency
0.00–599.00 Hz
0.00
04-12
13
th
step speed frequency
0.00–599.00 Hz
0.00
04-13
14
th
step speed frequency
0.00–599.00 Hz
0.00
04-14
15
th
step speed frequency
0.00–599.00 Hz
0.00
● Use the multi-function input terminals (refer to settings 1–4 of Pr.02-01–02-07 Multi-function Input Command) to
select the multi-step speed command (the maximum is 15
th
step speed). Pr.04-00 to Pr.04-14 sets the multi-
step speed (frequency) as shown in the following diagram.
● The external terminal/digital keypad/communication controls the RUN and STOP commands with Pr.00-21.
● You can set each multi-step speed between 0.00–599.00 Hz during operation.
● Explanation for the timing diagram of the multi-step speed and external terminals
The related parameter settings are:
– Pr.04-00–Pr.04-14: sets the 1
st
–15
th
multi-step speed (to set the frequency of each step speed).
– Pr.02-01–Pr.02-07: sets the multi-function input terminals (multi-step speed command 1–4).
● Related parameters:
– Pr.01-22 JOG frequency setting
– Pr.02-01 multi-function input command 1 (MI1)
– Pr.02-02 multi-function input command 2 (MI2)
– Pr.02-03 multi-function input command 3 (MI3)
– Pr.02-04 multi-function input command 4 (MI4)










