Operating Instructions

Descriptions of Parameter Settings
Descriptions of Parameter Settings
223 | 443
2208H
Display the positive / negative output torque estimated by the drive (+0.0: positive
torque; -0.0: negative torque) (XXX.X%)
2209H
Reserved
220AH
Display the PID feedback value after enabling PID function (XXX.XX%)
220BH
Display the AVI analog input terminal signal, 0–10 V corresponds to 0.00–100.00%
(see Explanation 1 in Pr.00-04)
220CH
Display the ACI analog input terminal signal, 4–20 mA / 0–10 V corresponds to 0.00–
100.00% (2.) (see Explanation 2 in Pr.00-04)
220DH
Reserved
220EH
IGBT temperature of the power module (XXX.X °C)
220FH
Reserved
2210H
The digital input status (ON / OFF), refer to Pr.02-12
(see Explanation 2 in Pr.00-04)
2211H
The digital output status (ON / OFF), refer to Pr.02-18
(see Explanation 3 in Pr.00-04)
2212H
Current step for the multi-step speed operation
2213H
The corresponding CPU digital input pin status (d.)
(see Explanation 3 in Pr.00-04)
2214H
The corresponding CPU digital output pin status (O.)
(see Explanation 4 in Pr.00-04 )
2215H
Reserved
2216H
Pulse input frequency (XXX.XX Hz)
2217H
Reserved
2218H
Reserved
2219H
Counter value of overload (XXX.XX %)
221AH
GFF (XXX.XX %)
221BH
DC bus voltage ripples (XXX.X V)
221CH
PLC register D1043 data
221DH
Magnetic field area of the synchronous motor
221EH
User page displays the value in physical measure
221FH
Output value of Pr.00-05 (XXX.XX Hz)
2220H
Reserved
2221H
Reserved
2222H
Reserved
2223H
Control mode of the drive 0: speed mode 1: torque mode
2224H
Carrier frequency of the drive (XX kHZ)
2225H
Reserved
2226H
Drive status
bit 1–0 00b: No direction
01b: Forward
10b: Reverse
bit 3–2 01b: Drive ready