Operating Instructions

Descriptions of Parameter Settings
Descriptions of Parameter Settings
247 | 443
01-01
Output frequency of motor 1
(Base frequency / Motor’s rated frequency)
Default setting
01-02
Output voltage of motor 1
(Base voltage / Motor’s rated voltage)
Default setting
01-03
Mid-point frequency 1 of motor 1
Default setting
01-04
Mid-point voltage 1 of motor 1
Default setting
01-05
Mid-point frequency 2 of motor 1
Default setting
01-06
Mid-point voltage 2 of motor 1
Default setting
01-07
Minimum output frequency of motor 1
Default setting
01-08
Minimum output voltage of motor 1
Default setting
01-10
Output frequency upper limit
50 (Hz)
01-11
Output frequency lower limit
35 (Hz)
01-12
Acceleration time 1
15 (sec.)
01-13
Deceleration time 1
15 (sec.)
01-43
V/F curve selection
2 (V/F curve to the power of 2)
07-06
Restart after momentary power loss
2 (Speed tracking by the minimum output frequency)
07-11
Number of times of restart after fault
5 (times)
07-33
Auto-restart interval of fault
60 (sec.)
Setting 05: Not supported
Setting 06: Not supported
Setting 07: Not supported
Setting 08: Not supported
Setting 10: Not supported
Setting 11: Not supported
Setting 12: Not supported
Pr.
Explanation
Settings
Default
13-01
to
13-50
Application parameters
(User-defined)
Description Group 14
14 Protection Parameters (2)
indicates the parameter can be set during operation.