Operating Instructions

Digital Keypad
Keypad Operation Process
25 | 443
Displayed items
Descriptions
Displays a parameter value.
Displays an external fault.
Displays “End” for approximately one second if the data has been accepted and
automatically stored in the register.
Displays if the setting data is not accepted or data value exceeds the allowed range.
Keypad Operation Process
Main Page Selection
Fig. 9:
Fig. 10:
Fig. 11:
The digital keypad does not support parameter copy functions.
F Page (Frequency command setting page)
General Mode 1
(The maximum operation frequency Pr.01-00 is in two decimal places. The example uses Pr.01-00 = 60.00 Hz.)