Operating Instructions

Digital Keypad
Keypad Operation Process
27 | 443
When Pr.13-00≠0, you enter into the APP page. After you press ENTER, the screen displays a corresponding short
name according to Pr.13-00 setting values. Follow the process below to set the industry-specific application macro
parameters.
Example:
When Pr.13-00 = 2, you enter into the APP page. After you press ENTER, the screen displays CoPr and the
compressor application macro parameters are enabled. Then, press ENTER again to check the industry-specific
parameter sets. Press the Up and Down keys to select the parameter to set. Finally, press ENTER to set the
parameter values. For other industry application, follow the same process.
Fig. 16:
Fig. 17:
Set Pr.13-00 = 1 to enable the user-defined applications. The USEr appears in the APP page after pressing
ENTER.
(If Pr.13-00 = 1 and you do not set any parameters for Pr.13-01–Pr.13-50, you cannot enter the sub-layer of the
USEr page.)
Fig. 18:
Follow the process below to set the user-defined application selection (Pr.13-00=1).