Operating Instructions

Warning Codes
Digital Keypad RT-KEYPAD
300 | 443
Reset condition
Directly reset
Record
N/A
Cause
Corrective Actions
The PLC program copied to the VFD
exceeds the allowable capacity
Check if the copied PLC program is compatible.
Use the correct capacity for the PLC program.
ID No.
Display on LCD Keypad
Warning Name
Description
95
Copy PLC: PLC function
(CPLF)
RT-KEYPAD Copy PLC function must be executed when PLC is
disabled.
Action and Reset
Action level
Software detection
Action time
Immediately act
Warning setting parameter
N/A
Reset method
Manual reset
Reset condition
Directly reset
Record
N/A
Cause
Corrective Actions
PLC function is enabled when
RT-KEYPAD is running PLC copy
Disable the PLC function first, and then run the PLC copy function again.
ID No.
Display on LCD Keypad
Warning Name
Description
96
Copy PLC: time-out (CPLt)
Copy PLC time-out
Action and Reset
Action level
Software detection
Action time
Immediately act
Warning setting parameter
N/A
Reset method
Manual reset
Reset condition
Directly reset
Record
N/A
Cause
Corrective Actions
RT-KEYPAD is removed while copying the
PLC program
The RT-KEYPAD cannot be removed during the PLC copy process.