Operating Instructions

Optional Accessories
EMC Shield Plate
414 | 443
3. As shown in the figure below, attach the shield plate on the AC motor drive.
2. Select a suitable R-clip according to the wire gauge used, and then attach the R-clip on the shield plate.
Frame
Screw
Torque value.
Figure
A
M3.5
6–8 kg-cm / [5.2–6.9 lb-in.] / [0.59–0.78 Nm]
B
M4
6–8 kg-cm / [5.2–6.9 lb-in.] / [0.59–0.78 Nm]
C
M4
6–8 kg-cm / [5.2–6.9 lb-in.] / [0.59–0.78 Nm]
D
M3
4–6 kg-cm / [3.5–5.2 lb-in.] / [0.39–0.59 Nm]
E
M3
4–6 kg-cm / [3.5–5.2 lb-in.] / [0.39–0.59 Nm]
F
M4
6–8 kg-cm / [5.2–6.9 lb-in.] / [0.59–0.78 Nm]
Table 23: Figure 1.