Operating Instructions

Summary of Parameter Settings
02 Digital Input / Output Parameters
44 | 443
Pr.
Explanation
Settings
Default
74: Over-torque 4
75: Forward RUN status
76: Reverse RUN status
02-18
Multi-function output direction
0000h–FFFFh (0: N.O.; 1: N.C.)
0000h
02-19
Terminal counting value reached
(returns to 0)
0–65500
0
02-20
Preliminary counting value
reached
(does not return to 0)
0–65500
0
02-21
Digital output gain (DFM)
1–55
1
02-22
Desired frequency reached 1
0.00–599.00 Hz
60.00 /
50.00
02-23
The width of the desired
frequency reached 1
0.00–599.00 Hz
2.00
02-24
Desired frequency reached 2
0.00–599.00 Hz
60.00 /
50.00
02-25
The width of the desired
frequency reached 2
0.00–599.00 Hz
2.00
02-34
Output frequency setting for multi-
function output terminal
0.00–599.00 Hz
(Motor speed when using PG Card)
0.00
02-35
External operation control
selection after reset and reboot
0: Disable
1: Drive runs if the RUN command remains after reset or reboot
0
02-47
Motor zero-speed level
0–65535 rpm
0
02-50
Display the status of multi-
function input terminal
Monitor the status of multi-function input terminals
Read only
02-51
Display the status of multi-
function output terminal
Monitor the status of multi-function output terminals
Read only
02-52
Display the external multi-function
input terminals used by PLC
Monitor the status of PLC input terminals
Read only
02-53
Display the external multi-function
output terminals used by PLC
Monitor the status of PLC output terminals
Read only
02-54
Display the frequency command
executed by external terminal
0.00–599.00 Hz (Read only)
Read only
02-58
Multi-function output terminal
(function 42): brake frequency
check point
0.00–599.00 Hz
0.00
02-78
Motor deceleration ratio
4.0–1000.0
200.0
02-79
Automatic positioning angle
setting
0.0–6480.0
180.0
02-80
Automatic positioning
deceleration time
0.00: Disable the function
0.01–100.00 sec.
0.00