Operating Instructions

Option Cards
RT-DNET-COMM
440 | 443
Interface
5-PIN open pluggable connector. PIN interval: 5.08 mm
Transmission method
CAN
Transmission cable
Shielded twisted-pair cable (with 2 power cables)
Transmission speed
125 kbps, 250 kbps, 500 kbps and extendable baud rate mode
Network protocol
DeviceNet protocol
AC Motor Drive Connection Port
Interface
24 PIN communication terminal
Transmission method
SPI communication
Terminal function
Communication module communicates with the AC motor drive through this port.
The AC motor drive supplies power to communication module through this port.
Communication protocol
HSSP protocol
Electrical Specification
Power supply voltage
15 Vdc (supplied by the AC motor drive)
Insulation voltage
500 Vdc
Communication cable power
consumption
0.85 W
Power consumption
1 W
Weight
23 g
Environment
Noise immunity
ESD (IEC 61800-5-1, IEC 6100-4-2)
EFT (IEC 61800-5-1, IEC 6100-4-4)
Surge Test (IEC 61800-5-1, IEC 6100-4-5)
Conducted Susceptibility Test (IEC 61800-5-1, IEC 6100-4-6)
Operation/storage
Operation: 14 to 122°F (-10 to 50ºC) (temperature), 90% (humidity)
Storage: -13 to 158°F (-25 to 70ºC) (temperature), 95% (humidity)
Shock/vibration resistance
International standards:
IEC 61800-5-1, IEC 60068-2-6 / IEC 61800-5-1, IEC 60068-2-27
DeviceNet Connector
PIN
Signal
Color
Definition
1
V+
Red
24 Vdc
2
H
White
Signal+
3
S
-
Ground
4
L
Blue
Signal-
5
V-
Black
0 V
LED Indicator and Troubleshooting
There are two LED indicators on the RT-DNET-COMM: NS LED and MS LED. NS LED and MS LED are dual-color
LEDs, displaying the connection status and error messages of the communication module.
5
4
3
2
1