Operating Instructions

Summary of Parameter Settings
05 Motor Parameters
50 | 443
Pr.
Explanation
Settings
Default
05-06
Stator resistance (Rs) for
induction motor 1
0.000–65.535 Ω
Depending on
the model
power
05-07
Rotor resistance (Rr) for induction
motor 1
0.000–65.535 Ω
0.000
05-08
Magnetizing inductance (Lm) for
induction motor 1
0.0–6553.5 mH
0.0
05-09
Stator inductance (Lx) for
induction motor 1
0.0–6553.5 mH
0.0
05-13
Full-load current for induction
motor 2 (A)
10–120% of the drive’s rated current
Depending on
the model
power
05-14
Rated power for induction motor 2
(kW)
0.00–655.35 kW
Depending on
the model
power
05-15
Rated speed for induction motor 2
(rpm)
0–xxxxx rpm (Depending on the motor’s number of poles)
1710 (60 Hz, 4 poles); 1410 (50 Hz, 4 poles)
Depending on
the motor’s
number of
poles
05-16
Number of poles for induction
motor 2
2–20
4
05-17
No-load current for induction
motor 2 (A)
0.00–Pr.05-13 default
Depending on
the model
power
05-18
Stator resistance (Rs) for
induction motor 2
0.000–65.535 Ω
Depending on
the model
power
05-19
Rotor resistance (Rr) for induction
motor 2
0.000–65.535 Ω
0.000
05-20
Magnetizing inductance (Lm) for
induction motor 2
0.0–6553.5 mH
0.0
05-21
Stator inductance (Lx) for
induction motor 2
0.0–6553.5 mH
0.0
05-22
Multi-motor (induction) selection
1: Motor 1
2: Motor 2
3: Motor 3 (VF or SVC control mode only)
4: Motor 4 (VF or SVC control mode only)
1
05-23
Frequency for Y-connection / △-
connection switch for an induction
motor
0.00–599.00 Hz
60.00
05-24
Y-connection /Δ-connection
switch for an induction motor
0: Disable
1: Enable
0
05-25
Delay time for Y-connection /Δ-
connection switch for an induction
motor
0.000–60.000 sec.
0.200
05-26
Accumulated Watt-second for a
motor in low word (W-msec.)
Read only
0.0
05-27
Accumulated Watt-second for a
motor in high word (W-sec.)
Read only
0.0