Operating Instructions

Descriptions of Parameter Settings
Descriptions of Parameter Settings
79 | 443
If you use 1: IMVFPG control mode along with MI7 as speed feedback, you also need to set Pr.10-00=5 and Pr.10-
02=5.
When Pr.00-10 = 0 and you set Pr.00-11 to 0, the V/F control diagram is as follows:
Fig. 23:
When Pr.00-10 = 0 and you set Pr.00-11 to 1, the V/F control + encoder diagram is as follows:
Fig. 24:
When Pr.00-10 = 0 and you set Pr.00-11 to 2, the sensorless vector control diagram is as follows:
IM Space Vector Control (IMSVC):