Data Sheet for Product

ManualsBrandsSiemens ManualsMonitorSED2

Table Of Contents

Submittal Sheet

Document No. 154-066

February 11, 2008

SED2 NEMA 12 Variable Frequency

Drives with Bypass Options

http://www.sbt.siemens.com/hvp/drives Siemens Industry, Inc.

Description

The Bypass Options are companion

packages for the family of SED2

Variable Frequency Drives.

For information on the family of

SED2 VFDs, see the SED2 Variable

Frequency Drives Submittal Sheet

(154-042).

Bypass Power Features

• 2-Contactor: Output & Bypass

− Overload protection in

bypass mode.

− Step-down transformer

with fused primary and

secondary.

− Contactors electrically and

mechanically interlocked.

• 3-Contactor (optional):

Input, Output, & Bypass

In addition to the 2-contactor features, 3-contactor

features provide:

− Drive test function

− Complete electrical isolation of drive

• Input Device

− Disconnect

− Fused

disconnect

(optional)

− Circuit breaker

(optional)

− All doors are

interlocked and

padlockable

• Reactor Options

− Line reactor mounted in bypass option enclosure.

− Line reactor (in NEMA 1 enclosure) supplied

separately.

− Load reactor mounted in bypass option enclosure.

− Load reactor (in NEMA 1 enclosure) supplied

separately.

Bypass Control Features

• Auto Bypass

− Relay logic allows user to send the motor to bypass

mode based on the drive’s programmable relay.

− The drive’s programmable relay, typically set to

fault, can be set up for applications that run full

speed for an extended period of time.

• Enable Input

− Generally used for safety tie-ins; the motor will not

operate the drive or bypass when open.

• Common Remote Start/Stop

− Common remote start/stop can be used in both

drive and bypass mode.

• Essential Services Mode

− Typically used for smoke purge; the motor goes to

bypass regardless of the selected mode.

− No call to stop will have an effect, including open

safety or stop commands.

− Only turning the power off or opening this contact

will stop the motor.

Bypass – Door Mounted Control Devices

• 2-Contactor Units

− Drive-Off-Bypass selector

− Bypass pilot light

• 3-Contactor Units

− Drive-Off-Bypass selector

− Bypass pilot light

− Drive Test on/off selector

Summary of content (10 pages)

PAGE 1
Submittal Sheet Document No. 154-066 February 11, 2008 SED2 NEMA 12 Variable Frequency Drives with Bypass Options Description Bypass Control Features The Bypass Options are companion packages for the family of SED2 Variable Frequency Drives. • For information on the family of SED2 VFDs, see the SED2 Variable Frequency Drives Submittal Sheet (154-042). • Auto Bypass − Relay logic allows user to send the motor to bypass mode based on the drive’s programmable relay.
PAGE 2
Submittal Sheet Document No. 154-066 February 11, 2008 SED2 NEMA 12 Variable Frequency Drives with Bypass Options Product Numbers Your Product Number: V Example Product Number: V A 3 4 0 . F 5 2 0 X Model VV VFD Variant [See Note 1] Series A Conventional Bypass 3 4 380 to 480 V 500 to 600 V Voltage HP rating 0.5, 0.7, [See Note 2 for these selections] 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.5, 10., 15., 20., 25., 30., 40., 50., 60., 75.
PAGE 3
SED2 NEMA 12 Variable Frequency Drives with Bypass Options Submittal Sheet Document No. 154-066 February 11, 2008 Dimensions Figure 1. Dimensions are in Inches (Millimeters). NOTE: Siemens Industry, Inc. Exact weight will be affected by actual horsepower/voltage and selected power options. http://www.sbt.siemens.
PAGE 4
Submittal Sheet Document No. 154-066 February 11, 2008 SED2 NEMA 12 Variable Frequency Drives with Bypass Options Table 3. NEMA 12 Bypass Frame Sizes and Power Ranges. HP kW 480V .5 .75 1 1.5 2 3 5 7.5 10 15 20 25 30 40 50 60 75 100 125 HA1 .37 .55 .75 1.1 1.5 2.2 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 – 575V B&C B&C D&E D&E F F N/A Table 4. NEMA 12 Bypass Output Current Ratings (Amps) — Per NEC Motor Tables. HP .5 480V 1.1 575V .9 NOTE: Page 4 of 8 .75 1 1.5 2 3 5 7.
PAGE 5
SED2 NEMA 12 Variable Frequency Drives with Bypass Options Submittal Sheet Document No. 154-066 February 11, 2008 Wiring Diagrams Figure 2. NEMA 12 Bypass 120 Vac Control Circuit. Page 5 of 8 http://www.sbt.siemens.com/hvp/drives Siemens Industry, Inc.
PAGE 6
Submittal Sheet Document No. 154-066 February 11, 2008 SED2 NEMA 12 Variable Frequency Drives with Bypass Options Wiring Diagrams, continued NOTES: 1. Branch circuit protection to be provided by installer, per UL508A, if not provided with drive. 2. For bypass operation, modify these drive parameters: P0704[0] and P0704[1] = 3. 3. Control and communication wiring should be 300V UL minimum. 4. Communication wiring should be run with maximum separation possible from all other wiring. 5.
PAGE 7
SED2 NEMA 12 Variable Frequency Drives with Bypass Options Submittal Sheet Document No. 154-066 February 11, 2008 Wiring Diagrams, continued Figure 4. NEMA 12 Bypass Terminations. Table 5. NEMA 12 Bypass Specifications. Specifications Input Voltage (3-phase) Temperature Humidity Siemens Industry, Inc. Description 480V, 3 AC ±10% 575V, 3 AC ±10% Operating: 32°F to 104°F (0°C to 40°C) Storage: –40°F to 158°F (–40°C to 70°C) 0 to 95% rh, non-condensing http://www.sbt.siemens.
PAGE 8
Submittal Sheet Document No. 154-066 February 11, 2008 SED2 NEMA 12 Variable Frequency Drives with Bypass Options Table 6. Drive Specifications.
PAGE 9
SED2 NEMA 12 Variable Frequency Drives with Bypass Options Submittal Sheet Document No. 154-066 February 11, 2008 Table 7. Order Worksheet. Item Qty. Designation Part Number Description Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners. © 2008 Siemens Industry, Inc.
PAGE 10
Submittal Sheet Document No. 154-066 February 11, 2008 SED2 NEMA 12 Variable Frequency Drives with Bypass Options Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their respective owners. © 2007 Siemens Building Technologies, Inc. Siemens Building Technologies, Inc.