Operating Instructions

Chapter 3 – Startring EasyComm
Siemens Building Technologies, Inc. 15
1. Make sure the USB Transfer sizes for both Receive and Transmit are set to 4096.
2. Make sure the Serial Enumerator box is checked.
3. Press the OK button.
4. In the Properties window, press the OK button.
5. In the System Properties window, press the OK button.
6. Close the Device Manager window.
7. Close the Control Panel.
8. Open the SED2 EasyComm software.
9. From the main menu select Tools (See Figure 17).
10. From the Tools menu, select ONLINE Settings … (See Figure 17).
Figure 17.
The message box shown in Figure 18 will appear, press the OK button to continue.
Figure 18.