Operating Instructions

Chapter 5 - Basic Functions
Siemens Building Technologies, Inc. 33
Drive Identification
To display information about a connected drive, including device or unit type, version, and bus
address, do the following:
From the Parameters menu, click Drive Identification.
The Unit Identification dialog box displays.
Figure 28.
Possible device (drive) identification errors include:
The version of the configured device does not match the version of the identified device
(shown with an exclamation point in a yellow triangle).
The identified device does not match the configured device
(shown with a white ‘X” in a red
circle).
To correct these errors, do one of the following:
1. Select the correct version in the Drive Properties
dialog box.
2. Configure the device that has been identified. Complete the Drive Properties dialog box
with the same type, version, and bus address as the identified device.