Operating Instructions

Chapter 5 - Basic Functions
Siemens Building Technologies, Inc. 39
Generating Parameter Sets Based on the Factory Setting
A parameter set based on the factory settings contains all of the parameters and values that are set
in a drive at the factory. This also includes parameters that cannot be changed (read-only
parameters). If you work with a parameter set file in the offline mode, you will see the parameter
values on the EasyComm screen, which were set when the drive was shipped or a drive where the
factory setting were re-established.
You can change parameters offline and then transfer the revised file online to the drive (download)
as follows:
1. Put the drive in offline mode.
2. From the File menu, click New
and then Based on Factory Setting.
Generating Empty Parameter Sets
Initially, an empty parameter set does not contain any parameter values. If you work offline with such
a file, and select a parameter, the value initially appears as five question marks (?????). Enter
parameter values to replace the question marks. The parameter set then contains the number of
parameters which you have entered. This means that a subsequent download is especially effective.
1. Put the drive in offline mode
.
2. From the File menu, click New
and then Empty parameter set.
Recalling Parameter Set (Parameter Sets Last Dealt With…)
To list the four most recently accessed parameter sets:
From the File menu, click Parameter Sets Last Dealt With…
Accessing the Complete Parameter List
To access the complete parameter list:
From the Parameter List menu, .
or click Parameters