Operating Instructions

Chapter 5 - Basic Functions
Siemens Building Technologies, Inc. 41
2. In the drop down list box, select New.
3. Enter a name for the free parameterization list.
4. Enter the desired parameter numbers in the P No. column and press ENTER after each entry.
Figure 33.
NOTE: When entering parameter numbers, do not enter leading zeroes. For example, for
parameter r0002, enter 2; for parameter P0100, enter 100.
To delete a parameter, use the DELETE key.
Comments can be added by simply typing text into the P No. co,umn.
From the File menu, click Save or Save As to save the parameter set.