Operating Instructions

SED2 EasyComm Startup and Operating Instructions
42 Siemens Building Technologies, Inc.
Modifying a Free Parameterization Set
To open an existing free parameter set, click on the name in the drop-down box.
To modify an existing free parameter set, do one of the following:
− To remove a parameter line from the set (not removing the entire set), click on the line and press
the DELETE key.
− To add a parameter line, enter the desired parameter number in the
P No. column at the end of the set.
Figure 34.
1. Text can be entered.
2. Enter the paramter number (without the leading P or the leading zeros. for example: P0003 is
desired to be seen, only the number 3 is entered on the line.
NOTE: If the paramter exists in the database, it will import the fields for that parameter.
3. If the paramter does not exist in the database, it will show up as text.
NOTE: Before you can download a modified free parameter set, it must be saved. To
remove an existing free parameter set, open the parameter set and click on the
Remove List button.