Operating Instructions

Chapter 5 - Basic Functions
Siemens Building Technologies, Inc. 61
Scripting Functions
Custom Script files can be created to facilitate start-up and troubleshooting of the SED2 Drive.
These script files do not load simultaneously with the EasyComm software. However, the script files
can be manually added to any EasyComm installation. To obtain the script files, please contact
Siemens Field Support at 800-877-7545,
press 2.
NOTE: Once the script files are imported into the EasyComm software, the files must remain in
the same location or the script files will not be found.
Install Script Files
To install the script files to EasyComm, complete the following steps:
1. Double-click SED2 EasyComm
on your computer desktop.
2. Click the New/Empty Parameter Set icon.
Figure 57.