Operating Instructions

Appendix A: Parameters, Defaults, and Settings
Siemens Building Technologies, Inc. 107
Parameter Description Unit
User
Setting
Min Default Max
Access
Level
P0040
Reset energy consumption
meter
— 0 0 1 3
r0050 CO: Active command data set — — — — 3
r0052 CO/BO: Actual status word 1 — — — — 3
r0053 CO/BO: Actual status word 2 — — — — 3
r0054 CO/BO: Actual control word 1 — — — — 3
r0055
CO/BO: Additional actual
control word
— — — — 3
r0056 CO/BO: Status of motor control — — — — 3
r0061 Actual rotor speed — — — — 3
r0086 CO: Actual active current A — — — 3
P0100
Europe/North America power
settings [kW or hp]
— 0 0 2 1
r0200
Actual power stack code
number
— — — — 3
r0206 Rated inverter power [kW]/[hp] — — — — 3
r0207 Rated inverter current A — — — 3
r0208 Rated inverter voltage V — — — 3
r0209 Maximum inverter current A — — — 3
P0304 Rated motor voltage V 10 Varies 2000 1
P0305 Rated motor current A 0.01 Varies 10000.00 1
P0307 Rated motor power — 0.01 Varies 2000.00 1
P0308 Rated motor cosPhi — 0.000 0.000 1.000 3
P0309 Rated motor efficiency % 0.0 Varies 99.9 3
P0310 Rated motor frequency Hz 12.00
50.00 or
60.00
650.00 1
P0311 Rated motor speed 1/min 0 Varies 40000 1
r0313 Motor pole pairs — — — — 3
P0340
Calculation of motor
parameters
— 0 0 4 3
P0350 Stator resistance (line-to-line) ohm 0.00001 Varies 2000.0 3
r0395 CO: Total stator resistance [%] % — — — 3
P0400 Select encoder type — 0 0 12 3