Operating Instructions

SED2 VFD Startup, Operation, and Maintenance Manual
110 Siemens Building Technologies, Inc.
Parameter Description Unit
User
Setting
Min Default Max
Access
Level
r0947 Last fault code — — — — 3
r0948 Fault time — — — — 3
r0949 Fault value — — — — 3
P0952 Total number of faults — 0 0 8 3
r0967 Control word 1 — — — — 3
r0968 Status word 1 — — — — 3
P0970 Factory reset — 0 0 1 1
P0971
Transfer data from RAM to
EEPROM
— 0 0 1 3
P1000 Selection of frequency setpoint — 0 2 77 1
P1001 Fixed frequency 1 Hz -650.0 0.00 650.00 3
P1002 Fixed frequency 2 Hz -650.0 5.00 650.00 3
P1003 Fixed frequency 3 Hz -650.0 10.00 650.00 3
P1004 Fixed frequency 4 Hz -650.0 15.00 650.00 3
P1005 Fixed frequency 5 Hz -650.0 20.00 650.00 3
P1006 Fixed frequency 6 Hz -650.0 25.00 650.00 3
P1007 Fixed frequency 7 Hz -650.0 30.00 650.00 3
P1008 Fixed frequency 8 Hz -650.0 35.00 650.00 3
P1009 Fixed frequency 9 Hz -650.0 40.00 650.00 3
P1010 Fixed frequency 10 Hz -650.0 45.00 650.00 3
P1011 Fixed frequency 11 Hz -650.0 50.00 650.00 3
P1012 Fixed frequency 12 Hz -650.0 55.00 650.00 3
P1013 Fixed frequency 13 Hz -650.0 60.00 650.00 3
P1014 Fixed frequency 14 Hz -650.0 65.00 650.00 3
P1015 Fixed frequency 15 Hz -650.0 65.00 650.00 3
P1016 Fixed frequency mode-Bit 0 — 1 1 3 3
P1017 Fixed frequency mode-Bit 1 — 1 1 3 3
P1018 Fixed frequency mode-Bit 2 — 1 1 3 3
P1019 Fixed frequency mode-Bit 3 — 1 1 3 3
P1020
BI: Fixed frequency selection
Bit 0
— 0:0 0:0 4000:0 3