Operating Instructions

Appendix A: Parameters, Defaults, and Settings
Siemens Building Technologies, Inc. 113
Parameter Description Unit
User
Setting
Min Default Max
Access
Level
P1910 Select motor data identification — 0 0 20 3
r1912 Identified stator resistance ohm — — — 3
P2000 Reference frequency Hz 1.00 50/60 650.00 2
P2001 Reference voltage V 10 1000 2000 3
P2002 Reference current A 0.10 Varies 10000.00 3
P2004 Reference power — — — — 3
P2009 USS normalization — 0 0 1 3
P2010 USS baud rate — 4 6 12 3
P2011 USS address — 0 0 31 3
P2014 USS telegram off time ms 0 0 65535 3
P2040 CB telegram off time ms 0 20 65535 3
P2041 CB parameter — 0 0 65535 3
r2050 PZD from CB — — — — 3
P2051 PZD to CB — 0:0 52:0 4000:0 3
r2053 CB identification — — — — 3
r2054 CB diagnosis — — — — 3
P2100 Alarm number selection — 0 0 65535 3
P2101 Stop reaction value — 0 0 5 3
r2110 Warning number — — — — 3
P2111 Total number of warnings — 0 0 4 3
r2114 Run time counter — — — — 3
P2115 AOP real time clock — 0 0 65535 3
P2155 Threshold frequency f_1 Hz 0.00 30.00 650.00 3
P2156
Delay time of threshold
frequency f_1
ms 0 10 10000 3
P2167 Switch-off frequency f_off Hz 0.00 1.00 10.00 3
P2168 Delay time T_off ms 0 10 10000 3
P2181 Belt failure detection mode — 0 0 6 3
P2182 Belt threshold frequency 1 Hz 0.00 5.00 650.00 3
P2183 Belt threshold frequency 2 Hz 0.00 30.00 650.00 3