Operating Instructions

SED2 VFD Startup, Operation, and Maintenance Manual
4 Siemens Building Technologies, Inc.
Environmental Compatibility and
Disposal
The SED2s are developed and manufactured using materials and
processes that take full account of environmental issues and which
comply with environmental standards. For disposal at the end of the
SED2 service life or in the event of its replacement, note the
following:
• For disposal purposes, this product is defined as waste derived
from electrical and electronic equipment (“electronic waste”) and
must not be disposed of as household waste. This applies
particularly to the PCB assembly.
• Always use the most environmentally compatible method of
disposal, in line with the latest developments in environmental
protection, recycling, and waste management. Observe all local
legislation and applicable laws.
• Always aim for maximum re-use of the basic materials, and
minimum environmental stress. Observe any notes about
materials and disposal that may be attached to individual
components.
• Use local depots and waste management companies, or see your
supplier or manufacturer to return used products or to obtain
further information on environmental compatibility and waste
disposal.
• Special handling of components such as electrolytic capacitors
and LCD panels may in some cases be compulsory by law or
environmentally desirable.
• The SED2 is delivered in re-usable packaging. Please retain this
packaging for later use or in case you need to return the product.