Operating Instructions

SED2 VFD Startup, Operation, and Maintenance Manual
52 Siemens Building Technologies, Inc.
SED2 Operator Panels
Overview
The SED2 includes the Basic Operator Panel (BOP) mounted as
standard. An Advanced Operator Panel (AOP) is available as an
option.
Figure 37. Basic Operator Panel
(BOP).
Figure 38. Advanced Operator
Panel (AOP).
NOTES:
1. On initial startup, the SED2 display values alternate
between 0.0 Hz (zero) and the speed it would be running if
it were given a start command.
2. The BOP or AOP can connect to or disconnect from the
SED2 without switching off power.
Basic Operator Panel (BOP)
The BOP provides access to the parameters of the SED2 and allows
for application-specific settings of the SED2.
The parameters and measured values are shown in a 5-digit LCD
display. The BOP can mount directly onto the SED2 or, alternatively,
it can mount into a control cabinet door using a special installation kit
(SED2-DOOR-KIT1 or SED2-DOOR-KIT2).
The BOP cannot store parameter data.