Operating Instructions

SED2 Operator Panels
Siemens Building Technologies, Inc. 55
NOTES:
1.
If you attempt to modify a parameter that cannot be modified under the
current conditions (for example, a parameter that cannot be modified
during operation or that can only be modified in the Quick Commissioning
mode), the display reads:
_ _ _ _ _
_ _ _ _ _
2.
Busy Signal — While changing parameters, the BOP can display:
P
_ _ _ _
for a maximum of 5 seconds. This display means that the SED2 is busy
with higher-priority activities.
3.
0 0 0 1 0
Displays when SED2 is processing information and will not respond to
input actions until processing is complete.
4.
B U S Y
Displays when SED2 is doing an automatic restart (for Version 1.40).