Operating Instructions

SED2 VFD Startup, Operation, and Maintenance Manual
82 Siemens Building Technologies, Inc.
Changing Individual Parameter Digits
To quickly change the value of a parameter, modify the individual
digits in the display as follows:
1. Verify that you are at the parameter values level by following these
steps:
a. Press
to enter the parameter level.
b. Press
to advance to the desired parameter.
c. Press
to access the parameter values level.
2. Press
the right-most digit starts to flash.
3. Modify the value of this digit with the
and pushbuttons.
4. Press
again. The next digit starts flashing.
5. Repeat steps 3 and 4 until the required value displays.
6. Press
to exit the parameter values level.