Data Sheet for Product

Technical Instructions Modbus RTU Interface Module for SED2
Document Number 155-767
February 25, 2009
Page 6 Siemens Industry, Inc.
Changing the
Configuration,
Continued
Once the Interface Module is in CONFIGURATION Mode, it will send its current
configuration to the terminal program.
Figure 9. MicroGate II Configuration Display.
Table 5. Keyboard Navigation.
Use the UP and DOWN arrows, on the computer
keyboard, to navigate to the field you want to change.
Change values with the LEFT and RIGHT arrows.
Save Configuration Navigate to here and press ENTER to save changes.