Operating Instructions

SED2 AOP Operating Instructions
8 Siemens Building Technologies
Language Selection
The AOP provides the capability to display information in five different languages.
NOTE: Prior to language selection, the AOP has no control over the SED2 VFD.
CAUTION:
Memory Limitation:
The delivered AOP supports English as well as four European languages: German,
French, Spanish, and Italian. Due to internal memory limitations, you should
delete one of these languages in order to upload the specified ten parameter
sets that can be held on the AOP.
To Delete a Language:
Select Language from the main menu, highlight the language you want to delete,
and then press and .
NOTE: Once a language has been removed, it cannot be restored.
Language selection is performed with the AOP online and connected to the SED2. After initial
power-up or after a reset and after the AOP performs internal self-tests, the AOP prompts you to
select a language.
From the main menu, use and to scroll through the list of options and to highlight the
Language item.
Press to confirm the selection. The AOP displays the language selection screen.
Use and to scroll through and highlight the desired language.
Press to confirm the selection. The AOP returns to the main menu.
Start Help
On completion of the initial AOP self tests, or if the Start Help feature is ON, the online help
screen displays.
If desired, use and to scroll through the help screens.
An arrow on the left-hand side of the screen indicates if more information is available and the
direction in which to navigate.
Use to move past the help screens and to go to the main menu.