Operating Instructions

AOP Operating Modes
Siemens Building Technologies, Inc. 23
NOTE: The parameter set from the inverter must be saved into the AOP or a default
parameter set must be saved into the AOP before using the PC to AOP connection
kit.
1. The AOP must be in SLAVE mode. AOP is slave to PC will display on the AOP.
a. From the AOP main menu, highlight MODE using the up or down arrows. Press
the P button.
b. From the MODE menu, highlight SLAVE using the up or down arrows. Press the
P button.
c. When AOP will be slave to PC. message displays, press the P button.