Operating Instructions

SED2 AOP Operating Instructions
Siemens Building Technologies 25
Timer Function
NOTES:
1. Before using the timer function as a control method, set the AOP real time clock as described
in the Set Time/Date section.
2. Setting a timing event for „every day‟, configures the same event for each day of the week
separately. To clear an „every day‟ event, you must clear the event individually from each
day.
3. When multiple events must be cleared from the Timer function, it may be easier to reset the
AOP as described in the AOP Reset section.
4. When in Master mode of operation and viewing the connected SED2 drives, a „T‟ displays in
the top left corner to indicate that the connected SED2 drives are under timed remote control
and may start or stop unexpectedly.