Operating Instructions

SED2 AOP Operating Instructions
Siemens Building Technologies 27
AOP Setup and Configuration
Setup Menu
Using the Setup option from the AOP main menu, you can personalize the following
characteristics of the AOP:
Backlighting
Screen Contrast
Large Numbers
Cursor Type
Start Help
Welcome Text
Parameter Set Names (Expert Level and above only)
User Defined Text
Set Time/Date (Service Level only)
AOP Reset
Use the following procedure to access the Setup menu:
1. From the main menu, use and to scroll through the list of options and to highlight the
Setup item.
Press to confirm the selection. The AOP displays a setup menu.
2. Use and to scroll through the setup menu and to highlight the desired option.
Press to confirm the selection.
NOTE: Simultaneously press and at any time to display relevant help screens.
Backlighting
To activate the backlighting option on the AOP, the following procedure should be performed:
1. Use and to highlight the Backlighting option on the setup menu.
Press to confirm the selection.
The AOP displays a backlighting selection screen.
2. Use and to select either an OFF or ON backlighting status.
Press to confirm the selection.
NOTE: When you select OFF for no backlighting, the AOP returns to the setup menu.
3. When you select ON for backlighting, the AOP displays a backlighting timer screen. The
backlighting timer turns off the AOP backlighting after a specified time period of inactivity (in
seconds).
Use and to select either an OFF or ON timer function.
Press to confirm the selection.
NOTE: When you select OFF for the backlighting timer, the AOP returns to the setup
menu and the AOP backlighting functions continuously.