Operating Instructions

AOP Setup & Configuration
Siemens Building Technologies, Inc. 29
Large Number Display
You can configure the AOP for a large-number display of the SED2 VFD frequency.
In the Large Number Display mode, you can temporarily switch to normal display mode (4 lines)
with the keys and . After an adjustable time delay, the display switches back to large
characters.
Use the following procedure to activate the large number display:
Use and to highlight the Large Numbers option on the setup menu.
Press to confirm the selection. The AOP displays a large number screen.
Use and to select either an OFF or ON large number display.
Press to confirm the selection.
NOTE: When you select OFF for no large number display, the AOP returns to the setup
menu.
Select a requested delay time (4 through 250 seconds).
Press to confirm the selection and to return to the main menu.
Cursor Type
1. Use and to highlight the Cursor Type option on the setup menu.
Press to confirm the selection.
The AOP displays a cursor type screen.
2. Use and to select the desired cursor type (blinking underline or
inverse-video [default]).
Press to confirm the selection and the AOP returns to the setup menu.
NOTE: Simultaneously press and at any time to display relevant help screens.
Start Help
NOTE: By default, the Start Help function is set ON. To change this setting, select Start
Help from the setup menu.
1. Use and to highlight the Start Help option on the setup menu.
Press to confirm the selection.
The AOP displays a start help screen.
2. Use and to select either an OFF or ON start help function.
Press to confirm the selection and the AOP returns to the setup menu.
NOTE: Simultaneously press and at any time to display relevant help screens.