Operating Instructions

AOP Setup & Configuration
Siemens Building Technologies, Inc. 31
Parameter Set Names
Use the following procedure to edit the names associated with the ten AOP parameter sets.
NOTE: This editing option is not available in the standard access level.
Use and to highlight the Parameter Set Names option on the setup menu.
Press to confirm the selection.
The AOP displays a parameter set name screen.
2. Use and to scroll through the parameter sets and to highlight the name needing
editing.
Press to confirm the selected parameter set name and the AOP highlights the first
character.
3. Use and to scroll through the characters until the desired character is shown.
Press to accept the character and to advance to the next character.
Repeat this step until the desired text is entered.
4. Press and hold to except the text string and to return to the setup menu.
Press and hold to cancel the text entry, restore the original text string, and to return to
the setup menu.
NOTE: Simultaneously press and at any time to display relevant help screens.
Set Time/Date
1. Use and to highlight the Set Time/Date option on the setup menu.
Press to confirm the selection.
The AOP displays a set time screen and highlights the first time field (hours).
2. Use and to scroll through the digits until the desired hour (0-23) displays.
Press to confirm the entry.
The cursor advances to the next time field (minutes [0-59], and then seconds [0-59]).
Repeat this step until the desired time (hours-minutes-seconds) is set.
3. The AOP displays a set day/date screen and highlights the first field (day of week).
Use and to scroll through and highlight the desired day of week.
Press to confirm the entry.
The cursor advances to the first date field (day of month).
4. Use and to scroll through the digits until the desired day of the month (01-31)
displays.
Press to confirm the entry.
The cursor advances to the next date field (month [01-12], and then year [2000-2250]).
Repeat this step until the desired date (day-month-year) is set.
5. Press and hold the key to accept the Day/Date settings and to return to the setup menu.