Operating Instructions

SED2 AOP Operating Instructions
32 Siemens Building Technologies
AOP Reset
WARNING:
The AOP reset function enables the deletion of all parameter sets and settings, internal
faults, and message logs stored in the AOP.
1. Use and to highlight the AOP Reset option on the setup menu.
Press to confirm the selection.
The AOP displays an AOP reset screen.
2. Use and to select ON or OFF to enable or disable the AOP reset function
respectively.
Press to confirm the selection.
Press to cancel this selection and to return to the setup menu.
3. When you select OFF, the AOP disables the AOP reset function and returns to the setup
menu.
When you select ON, the AOP displays the parameter reset screen.
Press to confirm the AOP reset function and to delete all parameter sets, internal faults,
and message logs. The AOP then restarts.
Press to cancel this selection and to return to the setup menu without deleting any
information. The AOP then restarts.
NOTE: Simultaneously press and at any time to display relevant help screens.