Operating Instructions

SED2 Conventional Bypass Option Operating Instructions
44 Siemens Building Technologies, Inc.
Required SED2 Parameter Settings
The factory programs the following SED2 parameters before shipping. If these parameters are
changed or if the SED2 is ever reset to factory default, you must reset these parameters as
follows:
Parameter Setting
P0704 in000 3
P0704 in001 3
NOTES:
1. The SED2 Fault must always be programmed as a fault. Do not change the SED2 fault
relay for other uses via P0731.
2. Changing P0700 resets all digital inputs and P0704 will require programming.