User Manual

Quick Start Guide Siemens
23/10/2017 Building Technologies
Page 38 of 51
Example: Main consumption report (Consumption Overview Report US)
First select an object in the tree that you would like to report on. The Generate reports option is shown on the right
hand side. Find the Main consumption report. Click Generate reports.
Mandatory settings are marked with an asterisk (*).
Enter the Start date and End date using the calendar editor to select the report period.
Set the Resolution i.e. the regularity of reading times with-in the generated report, daily, weekly, monthly, etc.
Set the Meter type.
Set the Output format (examples see above).
Click Next.
Keep reference area in m2/ft2, and click Finish. If there is m2/ ft2 entered into Navigator then the main consumption
will pro-vide energy per m2/ft2.
The report is generated.
Report Note: Some reports will provide different resolution options this depends on the report, rolling and static are
examples of this and are explained below.
• Rolling - Reports use today’s date in combination with the period. If the period of the report is less than the time
from the start date, then the start date is taken as today’s date period.
• Static - Reports will have the resolution taken from the start and end date period.