Data Sheet for Product
Table Of Contents
Submittal Sheet
Document No. 154-086
February 5, 2009
SED2 VFD NEMA Type 3R Bypass/Air Conditioner
http://www.sbt.siemens.com/hvp/drives Siemens Industry, Inc.
Description
The NEMA Type 3R Bypass with Air Conditioner allows
SED2 to be employed in a harsh environment.
The SED2 is designed specifically for HVAC applications
and supports a variety of digital and analog I/O and provides
built-in PID features to control pumps and fans. For
information on the family of SED2 VFDs, see the SED2
Variable Frequency Drives Submittal Sheet (154-042).
Features
Bypass Power
• 3-Contactor: Input, Output, and Bypass
− Overload protection in bypass mode.
− Step-down transformer with fused primary and
secondary.
− Contactors electrically and mechanically
interlocked.
− Drive test function.
− Complete electrical isolation of drive.
• Input Device
− Fused disconnect (optional).
− All doors are interlocked and padlockable.
− Circuit breaker.
• Reactor Options
− Line reactor mounted in bypass enclosure.
− Line reactor supplied separately (in NEMA Type
3R enclosure).
− Load reactor (in NEMA Type 3R enclosure)
supplied separately.
• Air Conditioner
− NEMA Type 4.
− Cooling capacity of 1,000 to 20,000 BTUH.
− Digital temperature controller.
− Active condensate management system.
− Unit efficiency.
− Compressor Protection System.
Bypass Control
• Auto Bypass
Relay logic allows user to send the motor to bypass
mode based on the drive’s programmable relay.
• Enable Input
Generally used for safety tie-ins; the motor will not
operate the drive or bypass when open.
• Common Remote Start/Stop
Can be used in both drive and bypass mode.
• Essential Services Mode
− Typically used for smoke purge; the motor goes to
bypass regardless of the selected mode.
− No call to stop will have an effect, including open
safety or stop commands.
− Only turning the power off or opening this contact
will stop the motor.
Bypass – Door Mounted Control Devices
• 3-Contactor Units
− Drive-Off-Bypass selector
− Bypass pilot light
− Drive Test On-Off selector